Grouting – Resin Anchors
|Resin Anchor Length (mm)||Resin Anchor Diameter (mm)||Resin Speed Ratio||Resin Speeds||Spin Time* (Seconds)||Hold Time* (Seconds)|
The FASLOC® two speed resin anchor is manufactured from a sophisticated blend of reinforced polyester resins and inert fillers. The FASLOC® two speed resin cartridge contains two distinct resin gel times in the same capsule where separate point anchor and tension times are required for bolting. Bolt rotation during installation ruptures and shreds the resin cartridge enabling the two key components to mix and create a chemical reaction transforming the resin into a solid anchor.
Pull out Test
Measured using slow set resin. 300mm encapsulation in 60MPa grout using 21.7mm core diameter high high tensile grade bolts in a 28mm diameter hole.
Punch Shear Test
Measured according to BS 2782 (Part 3), with slow set resin.
Suggested shelf life is 4 months when stored below 25°C. Storage at lower temperatures is recommended, along with careful stock rotation based on use-by date.