Grouting – Resin Anchors
|Typical Cardridge Lenghts (mm)||Typical Cardridge Diameters (mm)||Resin Speed||Spin Time (seconds)*||Hold Time (seconds)*|
|880||-||Extra Extra Slow||20||>1200|
The FASLOC® single speed resin anchor is manufactured from a sophisticated blend of reinforced polyester resins and inert fillers. The FASLOC® single speed resin anchors contain a single speed, two part (mastic and catalyst), pre-packaged into a single cartridge. The bolt rotation during installation ruptures and shreds the resin cartridge enabling the two key components to mix and create a chemical reaction transforming the resin into a solid anchor.
Pull out Test
Measured using slow set resin. 300mm encapsulation in 60MPa grout using 21.7mm core diameter high high tensile grade bolts in a 28mm diameter hole.
Published: September 2014
All dimensions, weights, quantities and specifications are those applicable at the time of publication and may be amended from time to time.
Punch Shear Test
Measured according to BS 2782 (Part 3), with slow set resin.
Suggested shelf life is 4 months when stored below 25°C. Storage at lower temperatures is recommended, along with careful stock rotation based on use-by date.