Grouting – Resin Anchors
Lokset® X2 resin capsules have been developed to enable full encapsulated mechanised resin bolting, utilising the Quick-ChemTM resin capsule insertion system. The Lokset® X2 system incorporates two resin capsules joined and folded in half for packaging, and is available in either single speed or TOOSPEEDIE configurations.
Lokset® X2 resin capsules are typically installed using development Jumbos in underground headings with an excavation height of 4 - 6mm, where hand insertion is not safe or practical. Individual Quick-Chem caps are supplied in the boxes with the resin capsules, and one cap is fitted to the fast set end of each X2 capsule unit before being inserted into a Quick-Chem tube for installation into the borehole.
A Quick-Chem insertion tube is attached to the Jumbo drifter, and used to safely insert resin capsules undamaged to the back of each borehole. Quick-Chem caps and insertion tubes are available to suit 25mm, 26mm, 30mm and 36mm diameter resin capsules. 25mm, 26mm and 30mm Quick-Chem caps are designed for use in 33mm - 35mm diameter boreholes. 36mm Quick-Chem caps are designed for use in 45mm diameter boreholes.
The Lokset® X2 range is available with any single (RA) or combination (TS) of Minova resin capsule mastics. Any capsule combination can be ordered by simply adding an X2 or X2Q (including Quick-Chem cap) to the end of an existing Lokset® Resin Capsule or Lokset TOOSPEEDIE® resin capsule code.